You must first connect canon MG3620 printer to tplink router in order to completely benefit from wireless printing’s convenience. Regardless of whether you have purchased a new TP-Link Deco mesh system or are updating your printer configuration, this tutorial will walk you through every step of the process, from initial setup to fixing regular connectivity issues.
Let’s look at how to quickly and simply connect Canon Mg3620 printer to Tplink router.
Knowing the Fundamentals
A well-liked wireless printer with a reputation for dependability and adaptability is the Canon PIXMA MG3620. Both wired and wireless connections are supported, however Wi-Fi connections are the most practical, particularly when utilizing a mesh system like TP-Link Deco.
Strong mesh networking features provided by TP-Link routers, particularly the Deco series, improve connectivity across your house. However, compared to simply plugging in a laptop or smartphone, connecting devices such as printers may need a few extra steps.
How to Connect MG3620 Canon Printer to tplink router: A Comprehensive Guide
1: Get Your TP-Link Deco System Ready
Make sure your Deco mesh system or TP-Link router is configured properly before connecting your printer. You will need to do a TP Link Deco Setup if this is a new installation.
TP Link Deco Setup:
- Get the TP-Link Deco app from App Store.
- Follow the in-app directions after plugging in the main Deco unit.
- Use Ethernet to join it to the modem.
- As directed, add satellite units to provide coverage across the entire house.
- Make a name and password for your Wi-Fi network.
- You’ll need your new SSID and password for the printer, so write them down.
2. Clear the cache on your Canon MG3620 printer.
Resetting your Canon MG3620 to factory settings will guarantee a clean connection:
- Activate the printer.
- Holding down the Wi-Fi button will cause the power lamp to flash.
- After releasing the button, push the Wi-Fi button once more and the Black button one more.
- The printer is now in setup mode when the Wi-Fi lamp flashes.
3. Use WPS to Connect MG3620 Canon Printer to tplink router.
WPS (Wi-Fi Protected Setup), which TP-Link routers support, enables secure device connections without requiring a password.
- To use WPS, press the Canon printer’s WiFi knob until a light flashes.
- Press the WPS knob on your Deco device or TP-Link router within two minutes.
- When connected, your printer’s Wi-Fi light will flash and then remain steady.
- Go to manual setup if your router does not allow WPS or if the connection does not work.
The Canon PRINT App for Manual Configuration
Try the Canon PRINT Inkjet/SELPHY software if WPS isn’t supported or doesn’t function:.
- Download the app, then install it on your phone.
- Verify that your phone is connected to your TP-Link Deco Wi-Fi.
- When the application launches, select Add Printer > Register Printer > Setup.
- Follow the instructions to identify the printer and connect it to your WiFi network.
- After connecting, try printing a test page to verify connectivity.
Tips for Troubleshooting
1. TP Link Deco reset
Resetting your TP link deco may help if you’re having trouble connecting. Your router will be reset to factory settings as a result.
How to execute tp link deco reset:
- Find the reset button on the Deco unit’s underside.
- Hold down the knob until the LED turns yellow, which should take around ten seconds.
- Utilize the TP-Link app to reconfigure the Deco system.
- After that, try the printer setup again.
2. Restart your gadgets
- Rebooting your phone, network, and printer will sometimes fix connectivity issues.
3. Verify the status of the printer
- Make sure that neither the Windows nor the macOS settings have “Use Printer Offline” selected for your Canon MG3620.
Final Thoughts
Connect canon MG3620 printer to Tp link router is simple, especially if the router is as advanced as the Deco series. Whether you utilize the Canon PRINT app, WPS, or manual setup, these steps will help you get your printer online in no time. If the issues persist, remember to perform a TP Link reset and repeat the TP Link Deco Setup for a new beginning. Once properly configured, your Canon MG3620 can print wirelessly from anywhere in your home.
Because they offer a stable wireless connection, cloud printing, and mobile access, your Canon MG3620 and TP-Link router complement each other well for use at home and in the workplace.
FAQs
1. Can I use my TP-Link router to connect my Canon MG3620 to a guest network?
Yes, but make sure that device-to-device communication is enabled on the guest network. If not, your phone or computer might not recognize the printer to print from.
2. Is 5GHz Wi-Fi supported by the Canon MG3620?
No, only 2.4GHz Wi-Fi bands are supported by the Canon MG3620. To ensure proper connectivity, make sure your TP-Link router broadcasts a 2.4GHz signal.
3. Can I use the Canon MG3620 with both Wi-Fi and USB at the same time?
No, the Canon MG3620 can connect wirelessly or via USB simultaneously. Each device connection setup requires you to select a single mode.
4. Which smartphone apps are compatible with Canon MG3620 wireless printing?
In addition to Canon PRINT, you can utilize Mopria for Android devices, Apple AirPrint, and Google Cloud Print (which is deprecated but still works in some configurations).
5. How can I print to a Canon MG3620 using a Chromebook?
After making sure the printer and Chromebook are connected to the same Wi-Fi, add the printer using its IP address in the Chromebook’s “Printers” settings.
