Deco X68 Setup | Tp link Deco X68 Setup

Large households may have smooth, fast internet coverage thanks to TP-Link’s Deco X68 high-performance mesh Wifi system. It is compatible with Wifi 6 (802.11ax) technology, which provides increased capacity, quicker speeds, and enhanced efficiency—particularly in settings where there are several connected devices. With its tri-band technology, the Deco X68 setup provides a dependable and steady connection, capable of supporting over 100 devices at once and covering an area of up to 7,000 square feet. Easy installation, network administration, and security measures to guarantee a seamless online experience are all made possible by the user-friendly setup, which is usually controlled via the TP-Link Deco app.

How to Setup the Tplink Deco X68

Deco X68 Setup Manual

  • The Ethernet connections, power adapters, and Deco units are all included in the box.
  • For the best coverage, use the Deco X68 units in strategic locations throughout your house. Validate that your modem is linked to the main Deco unit.
  • Turn on the Deco units by plugging them in. Await the stabilization of the LED lights.
  • On your smartphone, install the TP-Link Deco app (compatible with iOS and Android).
  • To setup Deco network, open app and observe commands, which include the Wifi name and keyword.
  • You may begin utilizing your network as soon as the program has finished setting everything up.

Deco X68 Setup with WPS

  • Validate that the Deco X68 devices are switched on before plugging them in. 
  • The LED ought should blink in a blue hue.
  • To activate the connection, push the WPS knob on your router or modem.
  • Within two minutes of turning on WPS on the router, press the WPS knob on the Deco X68 device. 
  • White blinking will occur on the LED.
  • WPS will be used to establish an automated connection between the Deco unit and the router. 
  • After the linking is comprehended, the LED light will turn solid blue.
  • Proceed with the network customisation setting using the Deco app.

Deco X68 Setup with app

  • Get TP-Link Deco app.
  • Launch app and login with a prevailing account or establish a new TP-Link ID.
  • Unveil the app and select “Start” to begin the setup procedure.
  • Use Ethernet to link the main Deco X68 machine to your modem/router.
  • You will be prompted by the app to scan the Deco unit bottom QR.
  • The remaining setup steps, such as naming your network and creating a keyword, will be walked you through by the app.
  • The application will confirm the successful connection when the setup is finished.

Deco X68 Reset Guide: Restore Your Device to Default Settings

  • Discover reset hole on Deco X68 unit.
  • Press and hold the reset knob.
  • The LED will glow red to show that the reset is underway, and the Deco unit will resume.
  • The Deco X68 is reset to factory settings when the LED goes blue. 
  • Now, you may use the Deco app to start the setup process over.

Deco X68 Firmware Update

  • Validate that you are connected to the Deco network and open the TP-Link Deco app on your smartphone.
  • In the app, choose the “More” tab and select “Firmware Update.”
  • Your Deco X68 machines’ most fresh firmware version will be checked by the app.
  • If there is a firmware apprise obtainable, copy and fix it by ensuing the directions.
  • Throughout the procedure, don’t switch off the Deco unit.
  • The firmware upgrade will be finished once your Deco X68 has restarted.

Tp Link Deco X68 Setup Issues And Troubleshooting

Deco’s Internet Connection Is Not Working

  • Confirm Modem Connection: Validate that the Ethernet wire is correctly connecting the main Deco unit to the modem.
  • Device restarts: Turn the modem and Deco units on and off. After 30 seconds after unplugging, re-plug them.
  • Confirm LED Status: There may be a connectivity problem if the main Deco unit’s LED is red or flickering. Validate that your internet service is operational.
  • ISP Interoperability: To find out if the modem is compatible with the Deco X68, get in touch with your ISP.

Units of Deco Not Syncing

  • Place the Units Properly: To improve communication, position the Deco units quite close to one another.
  • Make use of the Deco App: To guarantee correct synchronization, please follow the Deco app’s setup instructions.
  • Reset the Units: Press the reset knob for ten seconds to reset the units if synchronization doesn’t work, then set them up again.

Slow Internet Speeds

  • Confirm Placement: Validate that there are no obstacles in the way of the Deco units’ ideal placement.
  • Utilize the 5 GHz Band: Devices operating at higher frequencies should be connected to the 5 GHz band, which offers quicker performance than 2.4 GHz.
  • Update Firmware: Use the Deco app to check for updates and validate that your Deco X68 firmware is current.
  • Restriction of Connected Devices: Slowdowns may result from having too many devices on the network. To increase bandwidth, disconnect any gadgets that aren’t needed.

Problems with App Setup

  • Validate that Bluetooth is turned on: The Deco app sets up using Bluetooth. Authorize that Bluetooth is on phone.
  • Restart the App: Try the setup again after closing and reopening the app if it is unable to recognize the Deco unit.
  • Reinstall the application: To repair any damaged settings or issues, uninstall and reinstall the program.
  • Confirm your Wifi permissions: Make that the app is authorized to use the Wifi on your smartphone.

Deco Absence of Wifi Network Broadcasting

  • Confirm the Wifi settings: Authorize that Deco app “Wifi Settings” section has Wifi radio on.
  • Units for Rebooting Deco: If there are any short-term problems with Wifi broadcasting, restart the Deco devices.
  • Go back to the factory settings: Do a factory reset and start the network configuration over if the problem continues.

Deco X68 Terminating Communication

  • Check for Interference: Wifi signals can be disrupted by devices such as cordless phones or microwaves. Keep the Deco units away from these kinds of gadgets.
  • Firmware Update: To take advantage of performance enhancements, validate that the Deco X68 is running the most fresh firmware.
  • Channel Selection: To prevent interference from neighboring networks, consider adjusting the Wifi channel in the Deco app.

 

Disconnecting Wifi Device

  • Device Reboot: Start again the device that is having distress linking.
  • Confirm Device Compatibility: If utilizing sophisticated capabilities, validate that the device is Wifi 6 compatible, since older devices can have issues connecting.
  • Overload on the Network: For improved coverage, think about lowering the load or adding more Deco units if your Deco system has too many devices attached.

Deco Settings Cannot Be Accessible via the App

  • App Connectivity: Confirm that your phone has an active internet connection or is linked to the Deco network.
  • Clear App Cache: Try accessing the Deco app again after clearing its cache or data in the phone’s settings.
  • Reinstall the App: To address any possible software bugs, reinstall the Deco app if problems continue.

FAQs


What is the maximum speed supported by the Deco X68?

The Deco X68 uses Wifi 6 technology to deliver a maximum combined speed of 6,600 Mbps. With two 5 GHz bands and one 2.4 GHz band, it has a tri-band technology that offers dependable and quick performance for many devices and high-speed internet.

How many devices can the Deco X68 handle?

Up to 100 devices can be linked to the Deco X68 at once. Even with a large number of devices on the network, including laptops, smartphones, and smart home appliances, its Wifi 6 technology guarantees effective management of numerous devices and maintains a steady and quick connection.

What is the coverage area of the Deco X68?

With a three-unit system, the Deco X68 can hold area of up to 7,000 square feet. In big rooms or multi-story residences, its mesh network architecture eliminates dead zones and guarantees seamless Wifi coverage throughout the house, offering dependable internet access.

Is the Deco X68 backward compatible with older Wifi devices?

Indeed, older Wifi devices may still use the Deco X68. Even though it uses Wifi 6 for increased speed and efficiency, it can still connect to devices that support Wifi 4 (802.11n) and Wifi 5 (802.11ac), two earlier Wifi standards.

What type of parental controls does the Deco X68 offer?

Via the Deco app, the Deco X68 provides strong parental controls. Inappropriate content can be blocked, time limits may be established, internet behavior can be tracked, and family members can have accounts created. It enables users to plan Wifi usage, suspend the internet, and personalize access for every device.

Does the Deco X68 support WPA3 security?

Deco X68 is compatible with the most fresh and sophisticated encryption technology, WPA3 security. By strengthening defences against hacking attempts and making it more difficult for unwanted users to obtain access, WPA3 improves network security and guarantees that your Wifi network is private and safe.

Is the Deco X68 compatible with Alexa or Google Assistant?

Alexa and Google Assistant are also well-matched with Deco X68. By integrating your smart home, you can easily and hands-free operate your network using voice commands. These instructions may be used to pause the internet, check the condition of your network, or enable guest networks.

What do I do if the Deco X68 stops working?

Try rebooting the device and the modem first if the Deco X68 stops functioning. For troubleshooting, use the app and look for faults on the LED indication. Reconfigure the Deco X68 using the app after holding down the reset knob to return it to factory settings if the problems continue.

Scroll to Top