Deco X50 Setup

TP-Link’s Deco X50 mesh Wi-Fi system uses Wi-Fi 6 technology to provide seamless whole-home coverage. First, power on one Deco device and connect it to your modem over Ethernet to begin the setup process. To organize your network, obtain the TP-Link Deco app and observe the guidelines. By positioning them in various locations and linking them via the app, you may add more Deco units. The system offers strong security, gigabit speeds, and AI-driven mesh. It ensures a dependable and quick internet by optimizing connections for several devices. The app makes deco X50 setup simple to handle parental restrictions and firmware updates.

Deco X50 Setup Features

  • Wifi 6 technology: Increased capacity, lower latency, and quicker speeds are guaranteed with Wi-Fi 6 technology.
  • AI-Driven Mesh: This technology automatically adjusts connections to provide flawless coverage across the whole house.
  • Dual band joining: 2.4 GHz (574 Mbps) and 5 GHz (2402 Mbps) speeds are available with dual-band connectivity.
  • Parental Controls: Use time restrictions and content filters to regulate internet access.
  • TP-Link HomeShield Security: Offers security improvements and antivirus protection for your network.
  • Gigabit ethernet ports: Wired connections for consistent speeds are made possible via gigabit Ethernet ports.
  • Simple Setup with the Deco App: explains network administration and installation.
  • Smart home integration: Voice commands and Internet of Things devices are supported by Alexa and Smart Home Integration.
  • Adaptive routing: Adaptive routing guarantees the best routes for devices that are connected.
  • Firmware updates: Maintain the security and modernity of your system.

How To Access The Deco X50 Setup With Different Approaches

Deco X50 Setup without app

  • Connect one Deco X50 device to your modem using an Ethernet connection.
  • After plugging in the Deco unit, watch for the LED to turn completely white.
  • Open a browser and type http://tplinkdeco.net after connecting a device to the Deco’s Ethernet or Wi-Fi.
  • To access the settings, use your TP-Link ID or the standard login information.
  • Depending on your ISP’s needs, select PPPoE, Static IP, or Dynamic IP.
  • Configure your Wi-Fi password and SSID.
  • Add more Deco units, turn them on, and connect by following the online interface.
  • Make that every Deco unit is linked and offering the best possible coverage.
  • If required, download updates from the TP-Link website.

Setup Deco X50 As Access Point

  • Connect the primary Deco device to an existing router using an Ethernet wire.
  • Wait for the LED to steady after plugging in the Deco X50.
  • Go to http://tplinkdeco.net or use the TP-Link Deco app.
  • Enter the login information for your TP-Link account.
  • Change it to Access Point Mode after selecting Operation Mode.
  • Set up the Deco network’s SSID and keyword.
  • Put more Deco units nearby and turn them on.
  • Without changing the router’s routing capabilities, the modules will increase its Wi-Fi coverage.
  • To guarantee smooth functioning, test the connection.

Setup Deco X50 Manually

  • Use an Ethernet wire to connect the main Deco X50 machine to your modem.
  • After plugging in the Deco unit, watch for the LED to become entirely white.
  • Open a browser, plug up a device to Deco’s Wi-Fi, and type http://tplinkdeco.net.
  • To access the settings, use your TP-Link login information.
  • Depending on your ISP, select PPPoE, Dynamic IP, or Static IP.
  • Decide on your keyword and SSID.
  • Put more Deco units there and turn them on. You may manually link them using the web interface.
  • For optimal signal coverage, make sure the spacing is appropriate.
  • If necessary, get the most recent versions from TP-Link’s website.
  • Verify that every device is stable and connected.

Deco X50 Outdoor Setup

  • Use a weatherproof enclosure or put the Deco X50 in a protected location.
  • Make sure the power source is steady, ideally equipped with a surge protector.
  • For a reliable internet connection, if at all feasible, utilize a connected Ethernet connection.
  • Place indoor deco units in close proximity to one another to ensure uninterrupted communication.
  • Installing the Deco X50 within a waterproof case will shield it from dust and rain if it is exposed.
  • Make sure the main router or another Deco device sends a strong signal to the Deco unit.
  • Improve the directionality of Wi-Fi signals for devices that are outside.
  • To guarantee dependable internet, take a stroll around the outdoor space.
  • To avoid bodily harm, mount or repair the device.
  • Check for environmental wear and firmware on a steady root.

Deco X50 5g Setup Issues And Solutions

Both 2.4GHz and 5GHz bands are supported by the Deco X50, however users may experience problems configuring or connecting to 5GHz Wi-Fi. The following are typical issues and fixes:

  1. Unable to See the 5GHz Network
  • Make sure your gadget is 5GHz Wi-Fi compatible. Try approaching the Deco unit or reloading the network list.
 
  1. Devices Using 2.4GHz rather than 5GHz for connectivity
  • Create distinct 2.4GHz and 5GHz SSIDs by disabling Smart Connect in the Deco app’s Wi-Fi settings.
  • Connect devices to the 5GHz network by hand.
  1. The 5GHz signal is weak, or there are frequent disconnections.
  • Deco units should be placed in open spaces away from electrical interference.
  • To improve signal direction, enable beamforming in the application.
 
  1. After updating the firmware, 5GHz is not functioning.
  • Check for more recent firmware upgrades after restarting the Deco system. If problems continue, try a factory reset.

How To Perform Deco X50 Reset

Use these procedures if you need to reset your TP-Link Deco X50:

Soft reset:

  • Launch the TP-Link Deco app to do a soft reset (without losing settings).
  • Select Restart under More > Advanced > System.
  • Await the device’s reboot.
 

Restoring default settings with a factory reset:

  • Find the Deco X50 unit’s Reset button on the bottom.
  • Holding down the button will cause the LED to become yellow.
  • Wait for the device to reorganize after discharging the knob. When the LED is ready for setup, it will flicker blue.
 

Reset using the App (Another Way):

  • Launch the Deco app.
  • Go to Reset Deco under More > Advanced.
  • Verify the reset.
  • You have to use the app to re-configure the Deco X50 after a reset. This is helpful if you need to change your network outline or are having distress joining.

How To Update Firmware On Deco X50 

Your TP-Link Deco X50’s firmware should be updated for improved security and performance.

  • To update automatically (which is advised), launch the TP-Link Deco app.
  • Go to Update Deco under More.
  • Tap Apprise All if there is a new firmware version accessible.
  • When the update is finished, the Deco units will restart on their own.
 

Manual Update: 

  • Get the most recent Deco X50 firmware by going to the TP-Link Support Website.
  • If the Deco network is available, connect your PC to it and sign in to the web interface.
  • After downloading the file, select Firmware Update > Manual Upgrade and submit it.
  • Await the installation of the update.
  • To prevent system issues during the upgrade, keep the Deco units turned on.
  • For seamless upgrading, make sure your internet connection is steady.
  • Bug fixes, security, and Wi-Fi speed might all be enhanced by updates.

FAQs

 

How do I set up multiple Deco X50 units?

  • Set up the first Deco using the Deco app after connecting it to the modem.
  • Put more Deco units in the vicinity.
  • To link them automatically, turn them on and adhere to the app’s directions.
  • Placement should be optimized for improved coverage.
 

What do the LED colors on Deco X50 indicate?

  • Yellow (Solid): Getting started.
  • Blue (blinking): Prepared for configuration.
  • Green (Solid): Linked and operating without issue.
  • Red (Solid/Blinking): Problems with the connection.
  • Firmware update in white (pulsing).
 

Can I configure Deco X50 using a PC instead of the app?

No, a smartphone or tablet running the TP-Link Deco app is necessary for setting up the Deco X50. Nevertheless, by login into the Deco unit’s IP address, you may control a few settings using the online interface.

What is the difference between Router Mode and Access Point Mode?

  • DHCP and NAT are managed by the router mode, which is the default method.
  • Access Point Mode: Expands the network of an existing router by disabling routing features.
 

How do I update the firmware on Deco X50?

  • Launch the Deco application.
  • Select Update Deco under More.
  • If a new version is obtainable, tap Apprise All.
  • Await the automated reboot of the equipment.
 

How do I improve WiFi coverage with Deco X50?

  • Deco units should be placed in open spaces away from obstructions like walls.
  • Turn on AI-powered mesh to maximize efficiency.
  • To increase range, add additional Deco units.
  • For more robust communications between units, use Ethernet backhaul.
Scroll to Top