Deco AC1900 S4 Setup

Deco AC1900 S4 Setup is made to offer seamless internet coverage all throughout your house. The Deco app, which is compatible with both iOS and Android smartphones, facilitates the tplink deco setup procedure. The application walks you through configuration procedures, such as setting up a Wi-Fi network name and password, once you connect the main Deco device to your modem. To increase coverage, more Deco units may be added with ease. With its 1900 Mbps speed support, the system is perfect for multi-device management, online gaming, and seamless streaming.

How to Setup the Tplink Deco AC1900 S4 

 

Deco S4 Setup Manual

  • To achieve the best coverage, take the Deco S4 units out of the box and position them in the middle.
  • Link the router devices first.
  • Turn on the Deco unit after connecting it to a power source.
  • Install TP-Link Deco app.
  • Launch app and either login or establish a TP-Link account.
  • To add your primary Deco unit, follow the app’s instructions to configure your Wi-Fi name and password.
  • Repeat the procedure with more Deco units for greater coverage.
  • To guarantee coverage, finish Deco AC1900 S4 Setup and check your connection.

Deco AC1900 S4 Setup Wps

Use these procedures to configure deco ac1900 s4 setup WPS:

  • Open Deco app.
  • Select unit for Deco AC1900 S4 Setup.
  • Find the WPS option under the “More” or “Advanced” options.
  • To enable WPS, press the Deco app’s button.
  • Press the WPS button on the item you wish to connect (such as a printer or smart device) within two minutes.
  • Without requiring a password, the device will instantly establish a connection to the Deco network using WPS.
  • After connecting, confirm that the device is listed among the linked devices in the Deco app.

Deco Ac190 Setup With App

Here is a detailed how-to for configuring the Deco AC1900 S4 Setup with app:

  • Get TP-Link Deco app first.
  • Turn on your modem by connecting the main Deco unit to it.
  • Launch app and either generate a TP-Link ID or sign in with prevailing one.
  • To add a new Deco device and choose your model, tap “+” on the app.
  • To connect your phone to the Deco’s Wi-Fi network, follow the directions in the app.
  • Repeat the procedure for more Deco units as necessary.
  • After every device is linked, savour your uninterrupted Wi-Fi coverage!

Deco S4 Firmware Update

how to update Deco S4’s firmware:

  • Make sure the Deco network is linked to your smartphone or other device.
  • Open TP-Link Deco app.
  • Enter your password and TP-Link ID, or register if you don’t already have one.
  • To update a Deco unit, tap on it.
  • Navigate to the “Firmware Update” area, and software will look for fresh firmware automatically.
  • To finish the update, restart the Deco unit manually if it doesn’t reset automatically.
  • Verify in the app settings that the firmware version has been updated.

Factory Reset Deco S4

Take these actions to deco ac1900 s4 reset:

  • Locate Deco S4 unit reset knob.
  • Make certain that the Deco S4 is turned on and plugged in.
  • Press and hold reset switch, or until the LED indication begins to flash orange.
  • Wait for the Deco to reboot after releasing the button. After a while, the LED will flicker red to show that factory settings have been restored.
  • You may use the Deco app to re-configure the Deco S4 when the reset is finished.
  • Before continuing, make sure to backup any settings that are required because this operation removes all configurations.

Deco Ac1900 S4 Setup Issue And Troubleshooting

Deco Not Detected by App 

  • Make sure the power indicator is lighted and the Deco device is connected in.
  • Validate that internet connectivity and that modem is operating suitably if it is linked to one.
  • After ten seconds or so, unplug the Deco unit and then re-plug it.
  • You might need to reset the Deco if it’s still not detected:
  • Find the button that resets.
  • Hold it down until the orange blinking LED appears.

Internet Connection Problems

  • Verify that the router or modem is online and operating correctly.
  • Validate that Ethernet linking amid modem and Deco is firmly involved.
  • To find out whether there are any outages or glitches in region, contact ISP.

Issues with Wi-Fi Setup

  • If prompted during setup, make sure you are inputting the right WiFi name and password.
  • The Deco units should be placed far from possible bases of intrusion.
  • To build a robust mesh network, make sure the Deco devices are placed within the ideal range. They are best positioned in wide spaces away from walls.

Updates to the firmware

  • Check the app to see whether firmware updates are available after first setup. Updating firmware is essential for security and performance.

Custom Preferences

  • IP address conflicts may arise if you have more than one router or access point. Validate that DHCP server is on and Deco is in router mode.
  • To prevent conflicts, think about turning on bridge mode on the Deco if you’re connecting it to another router.

Overloading Devices

  • Performance may suffer if there are a lot of linked devices. During setup, disconnect any gadgets that aren’t needed.

Deco Unit Reset

Resetting the Deco unit to factory settings can be a good option if none of the aforementioned fixes work:

  • Find the button labeled Reset.
  • Hold down the switch for around ten seconds until the LED indicator begins to flicker orange, signifying a reset.

FAQs


How many Deco S4 units do I need to cover my house?

The size and design of your house determine how many Deco S4 units you’ll need. One unit typically occupies 1,500 square feet. To guarantee flawless coverage and communication throughout, bigger residences may need numerous units—two to three for 3,000–4,500 square feet, and more for larger regions or intricate design.

Can I use Deco AC1900 S4 with my existing router?

The Deco AC1900 S4 is compatible with your current router, yes. You can either connect the Deco directly to your modem to make it your primary router or you can use it in access point mode in addition to your existing router. You may improve Wi-Fi coverage without completely replacing your current router thanks to this flexibility.

What should I do if my Deco AC1900 S4 is not connecting to the internet?

Make sure your modem is working properly before attempting to connect your Deco AC1900 S4 to the internet. Restart the Deco devices and the modem. Check the Deco app’s settings and cable connections. Do a factory reset on the Deco devices and re-configure them if the problems continue.

How can I change the Wi-Fi name and password for my Deco S4?

Open Deco app to modify Deco S4 Wi-Fi name and keyword. From the “More” menu, pick “Wi-Fi Settings,” and then pick “Edit.” After entering your preferred Wi-Fi name (SSID) and password, save the modifications. Devices may need to reconnect as the updated settings take effect immediately.

How often should I update the firmware on my Deco S4?

Checking for firmware upgrades for your Deco S4 is advised every few months or anytime you encounter problems with connectivity. When upgrades become available, the Deco app will let you know. Maintaining firmware updates improves the stability and effectiveness of your network by ensuring peak performance, security improvements, and access to new features.

Can I control my Deco S4 remotely?

Yes, you can use the Deco app to remotely operate your Deco S4. From any location with an internet connection, you can use the app to adjust settings, keep an eye on network performance, and set up parental controls. To properly utilize remote functions, make sure your mobile device is online and sign in to your TP-Link account.

Scroll to Top